SMC's IS10 pressure switch is 16% lighter, and 11% smaller when compared to the IS1000. The IS10 is RoHS compliant and CE marked. Set pressure range is 0.1 to 0.4MPa (optional 0.1 to 0.6 MPa). Also available are the IS10M (pressure switch with spacer) and the IS10E (pressure switch with piping adapter). ISE30A-C6H-N-LB from SMC Corporation at Allied Electronics & Automation SMC ISE2-01 PRESSURE SWITCH, 145 PSI, USED EXLNT See more like this. SMC Pressure Switch PSE564-N01 pressure 0-500kPa 1-5vdc output. Brand New. SMC Pressure Switch IS2761-103L9 new See more like this. SMC IS1000 Mechanical Pressure Switch USED. Pre-Owned. $23.00. FAST 'N FREE. 2-color Display Digital Pressure Switch Series ZSE30/ISE30 With One-touch fittings High Precision, 2-color Display Digital Pressure Switch Series ZSE30/ISE30 How to Order PRESSURE OUT Manual Auto Press the button. ON OFF Hysteresis (H) P1 ON OFF n1 Hysteresis ON OFF SMC Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions and pages 687 to 691 for Pressure Switch Precautions. 1. Do not use in an environment, where water or oil is splashed. Because it is the open type Operating manual CD-ROM 3 cores, copy function, 1 m Copy function (up to 10 slaves) O-ring, one-touch clip included The key board can be locked to prevent any incorrect function of the operation switch. The pressure display can be set at zero when the pressure is open to the atmosphere. ?It is possible to change the settings while checking the measured value. ?IO-Link ?Angled display Good visibility from various mounting positions ?Rotating display Display can rotate 336 degrees after installation ?Applicable fluid:Air, Non-corrosive gas, Non-flammable gas (ISE70/71) :Liquid or gas that will not corrode materials of parts in contact with fluid (ISE7 G) the switch. Reduce the supply pressure to below the max. pressure rating and then reset the switch. Apply atmospheric pressure and then reset the switch. SMC